Welcome to Shavo Technologies Pvt. Ltd.


	MICROFOG
	Oilmist lubrication has demonstrated superior performance and reliability with low lubricant consumption, providing numerous benefits of running bearings cooler and lasting longer. Highly economical due to the low operating pressure and no requirement for sumps, elaborate filters and return piping. Oilmist lubrication is a total utilization system as only the optimum amount of lubricant is used. For high speed applications, this is the preferred system.
	MISTCOOL
	Mistcool units allow liquids to be sprayed where you want it and the finely divided mist or spray can extract more heat from the part concerned than gallons of the same liquid flooded over the part. Also Swarf is removed from the working area-sharper tools, increased cutting speeds, feed rates and improved surface finish with fewer tool changes are among the many benefits.
	SPRAYLUBE
	A quick, automatic and economical way to apply fluids in a wide range of Production, Processing and Finishing applications. When used for lubrication applications on conveyors, dies, moulds, machine cutting tools, etc. lubricant consumption is considerably reduced ensuring cleaner operating conditions. Spraylube Systems permit efficient heat removal / dissipation on heavy SPM machining operations or controlled cooling of heavy hot extruded sections.
	AIR AIDED OIL
	Extremely efficient and cost effective method of lubricating single or multiple points on machines.Provides a precise application of oil to the specified bearing surface. This oil is applied at the proper frequency in the right quantity to meet the lubrication requirements, keeping bearings, gears, shafts and seals running cool. Full protection from over or under lubrication. Tremendous saving of lubricant compared with traditional lubricating systems. Can be used especially on applications where stray mist must be avoided.
	MIST ELIMINATION System
	The most widely used and preferred mist removal method by Machine Tool Manufacturers. Operates on the principle of impaction using a centrifugal filter. Virtually no maintenance, proving superior to electrostatic technologies. Highly versatile in its mounting and application. Very economical as the mist removed can be converted back into oil through the oil return tube. Provides compliance with the environmental requirements for oilmist in a factory.
	CENTRALISED LUBRICATION
	Lubriquip & Trabon systems provide the largest number of options to industry for efficient and economic lubrication with automation control and feed-back options. All lubrication systems are modular in design which means that the system can be customer tailored for a specific type of equipment. Also a group of machines or a complete process line can be fitted with several different systems and can be integrated with a single control connected to a control monitoring system.